Enkamat A20

Enkamat A20 is high-performance erosion control mat for use in demanding water and channel erosion applications. It consists of a 22mm deep Enkamat factory-filled with a bitumen bound crushed stone filter where the mineral particles are held in the open structure formed by the filaments. To ensure a high water permeability and allow for vegetation growth, the filaments of Enkamat A20 must remain visible after filling with asphalt. Enkamat A20 is non-toxic and approved for the use in drinking water reservoirs. It is installed both above and below the water line.

Amazingly, despite being filled with chippings, Enkamat A easily establishes vegetation. Over time, the presence of the Enkamat will be forgotten, having been engulfed in vegetation, but its technical performance will provide long-term reassurance.

Downloads

Brochure

• Colbond - Enkamat Erosion Control - EM11-GB-A 03/2009

• Maccaferri - Erosion Protection Brochure

• Enkamat Design Guide - EMD

Case History

• Maccaferri - Haddiscoe Island Reinstatement

• Colbond - Enkamat A20, Vallei-Channel

Installation Guidelines

• Storage Handling and Laying Guide Enkamat, Enkamat A20

Technical Data Sheet

• Enkamat A 20